Especificacion estandar: GB/T 3880, ASTM B209, EN485
Alloy and Temper | |
---|---|
Alloy | Temper |
1xxx:1050,1051A, 1060, 1100 | O, F, H12, H14, H16, H18, H22, H24, H26, H28 |
3xxx:3003, 3004, 3005, 3105 | O, F, H12, H14, H16, H18, H22, H24, H26, H28 |
5xxx:5005, 5052, 5754, 5083 | O, F, H22, H24, H26, H28, H32, H34, H36, H38 |
Rango de tamaño
Dimension | Range |
---|---|
Thickness | 0.2 ~ 0.4 mm |
Width | 200 ~ 2200 mm |
– Ancho y longitud estándar: 1000 mm, 1250 mm, 1500 mm, 1219 mm, 1524 mm
– Acabado de superficie: acabado de fresado, a menos que se especifique lo contrario
– Protección de superficie:
Sin papel intercalado para todas las bobinas de aluminio.
Sin filmación de PE / PVC en el lado principal (si no se requiere)
Designación de temperamento
Temper | Definition |
---|---|
F | As fabricated (no mechanical property limits specified) |
O | Annealed |
H12 | Strain Hardened, 1/4 Hard |
H14 | Strain Hardened, 1/2 Hard |
H16 | Strain Hardened, 3/4 Hard |
H18 | Strain Hardened, Full Hard |
H22 | Strain Hardened and Partially Annealed, 1/4 Hard |
H24 | Strain Hardened and Partially Annealed, 1/2 Hard |
H26 | Strain Hardened and Partially Annealed, 3/4 Hard |
H28 | Strain Hardened and Partially Annealed, Full Hard |
H32 | Strain Hardened and Stabilized, 1/4 Hard |
H34 | Strain Hardened and Stabilized, 1/2 Hard |
H36 | Strain Hardened and Stabilized, 3/4 Hard |
H38 | Strain Hardened and Stabilized, Full Hard |